濟南感應門想要正常使用需要符合一定的基本條件，只有這些基本條件均達標才能保證感應門可以使用并且對設備不會產生損壞，還有一點就是在使用時需要注意一些事。下面小編來講講吧。

Jinan induction door needs to meet certain basic conditions if it is to be used normally. Only when these basic conditions are up to standard can the induction door be used without damage to the equipment. Another point is that you need to pay attention to something when using it. Let's talk about it.

感應門使用基本條件：

Basic conditions for use of induction door:

1.感應門對電源要求，AC220V50HZ地線可靠接地。

1. The induction door is required for power supply, and the AC220V 50HZ ground wire is reliably grounded.

2.感應門對溫度要求-20°C--+35°C。

2. The temperature of induction door shall be - 20 ° C -+35 ° C.

3.感應門對相對濕度要求≤80%。

3. The relative humidity of induction door shall be ≤ 80%.

4.感應門不可承受雨淋。

4. The sensing door shall not withstand rain.

5.感應門10米規劃內不得有高溫熱源及劇烈震源。

5. There shall be no high temperature heat source and severe earthquake source within the 10m plan of the induction door.

6.感應門不應受腐蝕氣體腐蝕。

6. The induction door shall not be corroded by corrosive gas.

7.感應門不可承受劇烈沖擊。

7. The induction door shall not withstand severe impact.

8.感應門附近不得有劇烈電氣干擾及磁場干擾。

8. There shall be no severe electrical interference and magnetic field interference near the induction door.

感應門使用注意事項：

Precautions for use of induction door:

1.為避免電擊危險，在設備、移動或翻開本產品電氣設備或門體外蓋時，請正確運用接地設備和斷開電源。電源線應接入有可靠接地的電源開關傍邊，電源電壓有必要符合本手冊要求。

1. In order to avoid the danger of electric shock, please properly use the grounding equipment and disconnect the power supply when the equipment, moving or opening the electrical equipment or the external cover of the door. The power line shall be connected to the side of the power switch with reliable grounding, and the power supply voltage must meet the requirements of this manual.

2.為保證感應門的正確運用，在運用和操作維護時有必要遵照廠家的有關要求進行。若感應門產生缺點，應按手冊的要求進行操作，并當即奉告嘉鑫門業感應門聯絡修補。

2. In order to ensure the correct use of the induction door, it is necessary to follow the relevant requirements of the manufacturer during the operation and maintenance. If the sensor door has defects, it shall be operated according to the requirements of the manual and Jiaxin Door Industry shall be informed immediately to contact the sensor door for repair.

3.感應門運用進程中，請遵照感應門危險標志，不得在內部逗留，嬉鬧，兒童應有成年人伴隨快速經過。對任何誤入誤用自動旋轉門而構成直接或直接損害及丟掉，公司不負任何責任。

3. In the process of using the induction door, please follow the danger sign of the induction door, and do not stay or play inside. Children should be accompanied by adults to pass quickly. The company will not be responsible for any direct or direct damage and loss caused by any misuse of the automatic revolving door.

4.任何擅自改裝處理感應門本體的行為，或許會導致感應門受損無法正常運用，如在質保期會脫質保，如在維保期會脫維保。

4. Any unauthorized modification of the induction door body may cause the induction door to be damaged and unable to operate normally, such as the warranty period, and the maintenance period.

5.保證通電保養使用作業之前，應保證感應門門體內部空間沒有異物以及機械電插鎖翻開情況等全部阻遏門體作業的要素，以免出現問題。

5. Ensure that there are no foreign matters in the inner space of the induction door body, and that the mechanical electric latch is turned over and other factors that prevent the operation of the door body before the electrified maintenance operation, so as to avoid problems.

此外如果長期缺乏保養，造成感應門存在問題和小故障無法及時處理，它會從一個小故障變成一個大故障，這可能導致感應門的癱瘓，所以定期對其進行檢查維護很重要，關注我們http://www.52yoga.net了解更多事項！

In addition, if the lack of maintenance for a long time causes problems and small faults of the induction door that cannot be handled in time, it will change from a small fault to a major fault, which may lead to the paralysis of the induction door. Therefore, it is important to check and maintain it regularly. Pay attention to us http://www.52yoga.net Learn more!